| 1. |
Remove the front wheel and tire.
Tightening
torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1
~ 79.6 lb-ft)
| |
| 2. |
Remove the front wheel speed sensor mounting
bolt (A).
Tightening
torque:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.9 ~
8.7 lb-ft)
|
|
| 3. |
Remove the front wheel
guard. |
| 4. |
Remove the front wheel speed sensor cable
mounting bolt. |
| 5. |
Disconnect the front wheel speed sensor
connector (A) and then remove the front wheel speed
sensor.
|
| 6. |
Installation is the reverse of
removal. |
| 1. |
Measure the output voltage between the
terminal of the wheel speed sensor and the body ground.
| •
|
In order to protect the wheel
speed sensor, when measuring output voltage, a 100 Ω
resister must be used as
shown. | |
|
| 2. |
Compare the change of the output voltage of
the wheel speed sensor to the normal change of the output voltage as
shown below.
V_low: 0.59 ~ 0.84
V
V_high:
1.18 V ~ 1.68 V
Frequency
range: 1 ~ 2,500
Hz
| | |
