VELOSTER(FS) >2013 > G 1.6 T-GDI > Emission Control System > Evaporative Emission Control System > Canister>Repair procedures  
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Lift the vehicle.
3.
Disconnect the vapor tube quick-connector (A,B) and the ventilation hose (C).
4.
Remove the canister assembly after removing installation bolts (D).

Inspection
1.
Check for the following items visually.
- Cracks or leakage of the canister
- Loose connection, distortion, or damage of the vapor hose/tube

A: Canister ↔ Atmosphere (Fuel tank air filter)
B: Canister ↔ Intake manifold
C: Canister ↔ Fuel tank
Installation
Installation is the reverse of removal.

Canister bracket installation bolt:
19.6 ~ 29.4 N.m (2.0 ~ 3.0 kgf.m, 14.5 ~ 21.7 lb-ft)
Canister installation bolt:
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)