VELOSTER(FS) >2013 > G 1.6 T-GDI > Engine Mechanical System > Intake And Exhaust System > Intercooler>Repair procedures  
Removal and Installation
1.
Disconnect the battery negative terminal.
2.
Disconnect the boost pressure sensor connector(A) RCV solenoid valve connector(B) cooling fan controller connector(C).
3.
Disconnect the vacuum hose(D).

4.
Disconnect the intercooler outlet hose.
(Refer to Intake and Exhaust System - "Intercooler pipe & hose")
5.
Disconnect the intercooler inlet hose.
(Refer to Intake and Exhaust System - "Intercooler pipe & hose")
6.
Remove the radiator upper bracket(A).

7.
Disconnect the RCV hose(A) and then remove the intercooler(B).

8.
Install in the reverse order of removal.